Jual Flange Stainless 304 & 316

flangestainlesssteel-javasteelpipe

Type
Blind, Welding Neck (WN), Slip on (SO),Threaded, Socket Weld (SW), Lap Joint (LJ)

Material :
Stainless Teel : ASTM A182, ASME SA182, F 304/ L, 316/ L

Size:  1/ 2 Inch To 24 Inch

Class:  150# , 300# , 600# , 900# , 1500#

ANSI Flanges

Standard Facings
RF - Raised Face
FF - Flat Face

Standard Ratings :
150LB, 300LB, 600LB, 900LB, 1500LB, 2500LB,
JIS 10K, 20K, PN 10, PN 16,PN 25,PN 40

Standard Dimensions
ANSI B16.5
ANSI B16.47

Spiral Wound Gaskets

Characteristic
Resiliency and strength make spiral wound gaskets a good choice for a variety of applications and environmental conditions.
They are made from winding a thin strip of metal wire, with soft fillers added to create an effective seal, and often have an outside centering ring, with an inner ring to offer additional radial strength.
Spiral wound gaskets have markings that indicate the manufacturer, the winding and filler materials, the pipe size (nominal), and the materials that the inner and outer rings are made from.
The markings conform to ASME B16.20.

Types of Spiral Wound Gaskets
Standard Spiral Wound Gaskets
Spiral Wound Gasket for Heat Shield
Manhole & handhole Spiral Wound Gaskets
Spiral Wound Gaskets for Heat Exchanger
Low-loaded Spiral Wound Gaskets

Range of Materials Spiral Wound Gaskets
321 Spiral Wound Gaskets
310 Spiral Wound Gaskets
400 Spiral Wound Gaskets
Inconel 625 Spiral Wound Gaskets
Inconel 825 Spiral Wound Gaskets
Hastelloy C276 Spiral Wound Gaskets
410 Spiral Wound Gaskets
317 Spiral Wound Gaskets
2205 Duplex Spiral Wound Gaskets
309 Spiral Wound Gaskets
Inconel 600 Spiral Wound Gaskets
Inconel 800 Spiral Wound Gaskets
Hastelloy B3 Spiral Wound Gaskets
Titanium Spiral Wound Gaskets

Raw Materials of Spiral Wound Gaskets
Graphite tape for SWG
PTFE Tape for SWG
Corrugated Graphite Tape
Flat/V-Shape metallic tape
Spool metallic strip for SWG
Metallic Strip

Spiral Wound Gasket maching with Flange
Flange type Sprial Wound Gasket Form
Flat Face Flange (FF) Gasket with Outer Ring
Gasket with Inner & Outer Ring
Raised Face Flange (RF) Gasket with Outer Ring
Gasket with Inner & Outer Ring
Male & Female Flange (M&F) Basic form Gasket
Gasket with Inner Ring
Tongue & Groove Flange (T&F) Basic form Gasket
Gasket with Inner Ring
Flat & Groove Flange (F&G) Basic form Gasket
Gasket with Inner Ring

 

The table below may be used for determining the correct filler.
Filler Material Temperature (°C) Max Operating Pressure (Kg/cm2)
Graphite -200 ~ +550 250
Asbestos -150 ~ +450 100
PTFE -240 ~ +260 100